TPU A80 UV-stabilized (UF-resistant) brand of flexible polyurethane, suitable for use in the food industry. The plastic is highly antibacterial and resistant to ozone.
It has a high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane.
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.
Print Options:
- Nozzle temperature 220-240°C
- Printing table temperature 60-80°
- Blowing the model as needed 20-60%
- Print speed 30-50 mm / s
- Plastic feed (Flow) 100-105%
- Nozzle diameter from 0.25 mm (min)
- Min. layer height 0.1 mm
- Heat resistance (min / max) -80 to +140°C
- Rod diameter tolerance 0.03 mm
- Quantity per coil ~ 280 m
- Shore Hardness A 80
- Elongation at break 500%
- Maximum tensile strength 45 Mpa
Reviews
There are no reviews yet.