TPU A80

54,00 

TPU A80 UV-stabilized (UF-resistant) brand of flexible polyurethane, suitable for use in the food industry. The plastic is highly antibacterial and resistant to ozone.
It has a high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane.
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.

Category:

TPU A80 UV-stabilized (UF-resistant) brand of flexible polyurethane, suitable for use in the food industry. The plastic is highly antibacterial and resistant to ozone.
It has a high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane.
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.

Print Options:

  • Nozzle temperature 220-240°C
  • Printing table temperature 60-80°
  • Blowing the model as needed 20-60%
  • Print speed 30-50 mm / s
  • Plastic feed (Flow) 100-105%
  • Nozzle diameter from 0.25 mm (min)
  • Min. layer height 0.1 mm
  • Heat resistance (min / max) -80 to +140°C
  • Rod diameter tolerance 0.03 mm
  • Quantity per coil ~ 280 m
  • Shore Hardness A 80
  • Elongation at break 500%
  • Maximum tensile strength 45 Mpa

Reviews

There are no reviews yet.

Be the first to review “TPU A80”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top